Using Effects In Garageband
- October 15, 2017
- Posted by: marlenedubois
- Category: Nursing Assistant Classes
While GarageBand may be marketed as an entry-level program, the item provides a surprising number of great sounding effects. In addition to sounding great, these effects are also very easy to work with. Let’s look at the different ways of which effects can be used in your GarageBand songs.
Software instruments come pre-loaded with four effects. Let’s look at them individually:
- Compressor: Technically, compression is usually a form of dynamics processing of which allows you to “squeeze” the dynamic range of a signal. In real-world terms, This particular means of which the difference between the loudest part of a signal as well as the softest part is usually decreased. In effect, the soft parts of a sound get a little louder as well as the loud parts get a little softer. This particular allows the signal to pop out a little more within the mix. Compression is usually used most often on very dynamic signals like drums as well as vocals.
- Visual EQ: Short for equalization, EQ allows you to enhance or decrease the volume of certain frequency ranges in a sound. As you add tracks to your song you may find of which your mix begins to sound “muddy” as well as undefined. You can combat This particular by removing unimportant frequencies by each track. As an example, removing some low-mids by a vocal track may help the item sparkle a little more.
- Master Echo: This particular slider controls how much signal by This particular track is usually sent through the Master Echo effect.
- Master Reverb: This particular slider controls how much signal by This particular track is usually sent through the Master Reverb effect.
Real instruments come pre-loaded with the same four effects as software instruments, with the addition of one brand-new effect:
- Noise Gate: The purpose of a noise gate is usually to keep out or “turn off” any sound below a certain threshold or volume level. A perfect use for a noise gate might be to eliminate pickup noise as well as hum by a guitar signal. When the guitarist isn’t playing the noise gate is usually closed, keeping the pickup hum by being heard within the mix, however as soon as the guitarist starts playing the noise gate opens up as well as the guitar signal is usually let through.
Guitar tracks deal with effects in a different manner by software as well as real instruments. Not to disappoint anyone, however I’m going to save This particular for another article. I wouldn’t be able to do the item justice in a few short sentences here.
The signals by all of the separate tracks in GarageBand run through the effects on the master track. The master track in GarageBand comes pre-loaded that has a few effects of which are broken into two groups:
The amount of each track of which runs through these two effects is usually controlled by the master sliders on each instrument track.
- Echo: An echo is usually a delayed repeat of a sound of which usually occurs at a subdivision of the beat, like quarter-notes or eighth-notes.
- Reverb: Put together enough separate echoes as well as what you get is usually reverb. Think of reverb as the ambience of a space. Generally, the bigger the space, the longer the reverb time.
These default to off so you’ll need to turn them on if you want to use them.
- Visual EQ: Same as with the software as well as real instruments.
- Compressor: Ditto
- Ducker: Used most often in voice-over work, a ducker is usually designed to automatically reduce the volume of backing tracks while a lead track plays. This particular isn’t used too often in music.
Just Use The Presets
The effects in GarageBand are all very editable however I might suggest of which you start by using the presets. Each effect comes that has a very nice set of presets of which will work well for about 0% of your needs. If you find yourself needing something of which the presets aren’t giving you then I might suggest following these steps:
- Pick a preset of which is usually close to what you are looking for.
- Clicking on the graphic on the left side of the effect will bring up the editing parameters for of which particular effect.
- at This particular point start adjusting the effect parameters until you get the sound you want. Don’t be afraid to experiment because you can always go back to the preset if you actually mess things up.